Ceiling speaker suppliers in Bangladesh
In industrial units, the speakers allow management to make announcement for workers. However, it is impossible to place a large speaker inside every room, office and working areas. To understand...
Combination type reflex horn speakers provide by Olefins trade corporation in Bangladesh. Stainless steel brackets and hardware, and powder-coated horn. Also Shock-resistant aluminium oval horn. Horn speaker is suitable for School, college, prayer hall, outdoor, factory and any place where sound level is upper than 110 dB.
TOA SC series paging horn speakers provide intelligible voice paging and tone signaling for indoor and outdoor sound system applications. Fully weather-resistant for reliable operation in demanding environmental conditions, SC Series models are available with a choice of power ratings from 10W to 50W. High impedance models include SC-610T (10W), SC-615T (15W) and SC-630T (30W), each with a built-in 25 V / 70.7 V transformer with external screwdriver-adjustable power taps. Low impedance models include SC-610 (10W, 8 ohm), SC-615 (15W, 8 ohm), SC-630 (30W, 8 ohm) and SC-651 (50W, 16 ohm). The SC Series are easy to install in wall, pole or ceiling-mount applications and include corrosion-resistant stainless-steel mounting hardware. The SC Series models are also designed for intercom talk-back applications requiring dual operation as both a microphone and speaker.
The new SC Series Paging Horn Speakers are direct replacements for the now discontinued TC Series products. Also see the new CS Series Wide-Range Paging Speakers.
* Note: For outdoor installation, it is recommended that they are installed under roofs, eaves, or in other locations not directly exposed to rain or snow.
Specification of Horn Speakers
| Rated Input | 10 W |
|---|---|
| Line Voltage | 100 V line or 70 V line |
| Rated Impedance | 100 V line: 1 kΩ (10 W), 2 kΩ (5 W), 3.3 kΩ (3 W), 10 kΩ (1 W) 70 V line: 500 Ω (10 W), 1 kΩ (5 W), 2 kΩ (2.5 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W) |
| Sound Pressure Level | 110 dB (1 W, 1 m at 500 Hz to 2.5 kHz peak level) |
| Frequency Response | 315 Hz – 12.5 kHz |
| Dust/Water Protection | IP65 |
| Polarity | Hot: Black, Com: White |
| Operating Temperature | -20 ℃ to +55 ℃ (must be free from dew condensation) |
| Finish | Horn flare: Aluminum, off-white, powder coating Reflector horn and rear cover: ABS resin, off-white Bracket, screws and bolts: Stainless steel Speaker cable: Polyvinyl chloride insulated cabtyre cable (6 mm in diameter, 600 mm in length) |
| Dimensions | 172 (W) × 161 (H) × 188 (D) mm |
| Weight | 1.2 kg |
| Option | Swivel bracket: YS-151S (Can be used instead of the supplied bracket.) |
| Rated Input | 15 W |
|---|---|
| Line Voltage | 100 V line or 70 V line |
| Rated Impedance | 100 V line: 670 Ω (15 W), 1 kΩ (10 W), 2 kΩ (5 W), 3.3 kΩ (3 W) 70 V line: 330 Ω (15 W), 670 Ω (7.5 W), 1 kΩ (5 W), 2 kΩ (2.5 W), 3.3 kΩ (1.5 W) |
| Sound Pressure Level | 112 dB (1 W, 1 m at 500 Hz to 2.5 kHz peak level) |
| Frequency Response | 280 Hz – 12.5 kHz |
| Dust/Water Protection | IP65 |
| Polarity | Hot: Black, Com: White |
| Operating Temperature | -20 ℃ to +55 ℃ (must be free from dew condensation) |
| Finish | Horn flare: Aluminum, off-white, powder coating Reflector horn and rear cover: ABS resin, off-white Bracket, Screws and bolts: Stainless steel Speaker cable: Polyvinyl chloride insulated cabtyre cable (6 mm in diameter, 600 mm in length) |
| Dimensions | 222 (W) × 179 (H) × 234 (D) mm |
| Weight | 1.3 kg |
| Option | Swivel bracket: YS-151S (Can be used instead of the supplied bracket.) |
| Rated Input | 30 W |
|---|---|
| Line Voltage | 100 V line or 70 V line |
| Rated Impedance | 100 V line: 330 Ω (30 W), 670Ω (15 W), 1 kΩ (10 W), 2 kΩ (5 W) 70 V line: 170 Ω (30 W), 330 Ω (15 W), 670 Ω (7.5 W), 1 kΩ (5 W), 2 kΩ (2.5 W) |
| Sound Pressure Level | 113 dB (1 W, 1 m at 500 Hz to 2.5 kHz peak level) |
| Frequency Response | 250 Hz – 10 kHz |
| Dust/Water Protection | IP65 |
| Polarity | Hot: Black, Com: White |
| Operating Temperature | -20 ℃ to +55 ℃ (must be free from dew condensation) |
| Finish | Horn flare: Aluminum, off-white, powder coating Reflector horn and rear cover: ABS resin, off-white Bracket, screws and bolts: Stainless steel Speaker cable: Polyvinyl chloride insulated cabtyre cable (6 mm in diameter, 600 mm in length) |
| Dimensions | 285 (W) × 227 (H) × 277 (D) mm |
| Weight | 2 kg |
| Option | Swivel bracket: YS-151S (Can be used instead of the supplied bracket.) |
Driver Unit & Mic
The TC-631 is a highly intelligible, general-purpose speaker suited to public address announcement applications. Its external speaker component finished with powder coating, and stainless steel screws ensure the unit’s weatherproof capability.
| Rated Input | 30 W |
|---|---|
| Rated Impedance | 16 Ω |
| Sensitivity | 110 dB (1 W, 1 m) |
| Frequency Response | 200 Hz – 6 kHz |
| Dust/Water Protection | IP65 |
| Polarity | Hot: Black, Com: White |
| Operating Temperature | -20 ℃ to +60 ℃ (-4 ゜F to 140 ゜F) (must be free from dew condensation) |
| Finish | Horn flare: Aluminum, off-white, powder coating Reflector horn: ABS resin, off-white Bracket holder: Aluminum, gray, powder coating Bracket: Steel, gray, powder coating Rear cover: ABS resin, gray Screw and bolts: Stainless steel Speaker Cable: Polyvinyl chloride insulated cabtyre cable (6 mm (0.24″) in diameter, 600 mm (23.62″) in length) |
| Dimensions | φ500 × 463 (D) mm (φ19.69″ × 18.23″) |
| Weight | 4.1 kg (9.04 lb) |
| Applicable Horns | TH-650, TH-660 |
|---|---|
| Rated Input | 30 W |
| Line Voltage | 100 V line or 70 V line |
| Rated Impedance | 100 V line: 330 Ω (30 W), 670 Ω (15 W), 1 kΩ (10 W), 2 kΩ (5 W) 70 V line: 170 Ω (30 W), 330 Ω (15 W), 670 Ω (7.5 W), 1 kΩ (5 W), 2 kΩ (2.5 W) |
Sensitivity
| 110 dB (1 W, 1 m) (When operated with JIS C 5504 standard horn.) | |
| Frequency Response | 150 Hz – 6 kHz (When operated with JIS C 5504 standard horn.) |
| Dust/Water Protection | IP65 (When a driver is operated with a horn.) |
| Horn Coupling | 1 – 3/8 18 threads (inch screw) |
| Polarity | Hot: Black, Com: White |
Operating Temperature
| -20 %%dC to +60 %%dC (-4 ゜F to +140 ゜F) (no condensation) | |
| Finish | Flange: Aluminum, gray, powder coating Rear cover: ABS resin, gray Screws: Stainless steel Speaker cable: Polyvinyl chloride insulated cabtyre cable (6 mm (0.24″) in diameter, 600 mm (23.62″) in length) |
| Dimensions | %%c139 × 149 (D) mm (φ5.47″ × 5.87″) |
| Weight | 1.9 kg (4.19 lb) |
| Option | Driver unit cover: UC-200A |
| Applicable Drivers | TU-631, TU-631M, TU-651, TU-651M |
|---|---|
| Sound Pressure Level | 110 dB (1 W, 1 m) (When operated with a driver.) |
| Frequency Response | 200 Hz – 6 kHz (When operated with a driver.) |
| Dust/Water Protection | IP65 (When operated with a driver.) |
| Driver Coupling | 1 – 3/8 18 threads (inch screw) |
| Operating Temperature | -20 ℃ to +55 ℃ (must be free from dew condensation) |
| Finish | Horn flare and flange: Aluminum, off-white, powder coating Reflector horn: ABS resin, off-white Bracket holder: Aluminum, gray, powder coating Bracket: Steel, gray, powder coating Screws and boits: Stainless steel |
| Dimensions | φ500 × 394 (D) mm |
| Weight | 2.9 kg |
